![background image](http://html1.mh-extra.com/html/barco/medea-series/medea-series_installation-manual_4187181057.webp)
57
About this chapter
This chapter describes how to power up, control and set up your projector setup when the physical installation
process is complete.
How controlling the projector ?
The projector can be controlled by the local keypad, by the remote control unit or by browser application.
Location of the local keypad ?
The local keypad is located on the right side of the projector.
Remote control functions.
This remote control includes a battery powered infrared (IR) transmitter that allows the user to control the
projector remotely. This remote control is used for source selection, control, adaptation and set up.
Other functions of the remote control are :
•
switching between stand by and operational mode.
•
switching to "pause" (blanked picture, full power for immediate restarting)
•
direct access to all connected sources.
Overview
•
•
•
•
•
•
Increasing the projector life time
•
•
•
•
R5906141 /02
Medea series
Summary of Contents for Medea series
Page 1: ...ENABLING BRIGHT OUTCOMES Installation Manual Medea series...
Page 18: ...R5906141 02 Medea series 18 Safety...
Page 29: ...29 Overview Installation process projector R5906141 02 Medea series Installation process 3...
Page 56: ...R5906141 02 Medea series 56 Input Communication...