![background image](http://html1.mh-extra.com/html/barco/medea-series/medea-series_installation-manual_4187181053.webp)
R5906141 /02
Medea series
53
6.4.4 SDI
Specifications
Parameter
12G-SDI
3G-SDI
Standard
SMPTE ST-2082-1 and ST-2082-10
standards
SMPTE 424M-2006 10bit level A
Connector
Samtec BNC7T-J-P-HN-RA-BH1
1x) BNC 75 ohm type IEC 60169-8,
Amendment 2 1997, A
Bandwidth
12GHz
>3 GHz
Return loss
-6dB @ 12GHz
>10dB at 3GHz
Impedance
75 ohm resistive
75 ohm resistive
6.4.5 HDBase T
Specifications
Parameter
Value
Reference specification
HDBaseT 1.0 Specification, June 2010
Connector
Standard RJ-45, 8P8C
Signal characteristics
HDBaseT
Max. cable length (1080p/48b/60Hz)
100 m (Cat5e/6), Pixel Clock <=225HHz, Video
Datarate <=5.3Gbps
70 m (Cat5e/6), Pixel Clock >225HHz, Video
Datarate >5.3Gbps
100 m (Cat6a/7), Pixel Clock >225HHz, Video
Datarate >5.3Gbps
Max TMDS Clock Frequency
270 MHz
Max video resolution supported
1920x1200 @60Hz (WUXGA 60Hz)
HDCP Pass-Through
Yes, from Source to Projector
IR Extension
Not Supported
RS-232 Extension
Not Supported
10/100Mbps Ethernet Pass-Through
Not Supported
Fallback to 100BaseTx, IEEE 802.3u
Not Supported
USB Over Centre Tap
Not Supported
Power Over Ethernet
Not Supported
Audio
Not Supported
LEDs - HD Base Status
Operation: Green, Left
Link/Mode: Yellow, Right
6.5 Control interfaces
About
The following control interfaces are available on the projector:
•
1x RS-232 (for projector control)
•
1x LAN/Ethernet (for projector control
Summary of Contents for Medea series
Page 1: ...ENABLING BRIGHT OUTCOMES Installation Manual Medea series...
Page 18: ...R5906141 02 Medea series 18 Safety...
Page 29: ...29 Overview Installation process projector R5906141 02 Medea series Installation process 3...
Page 56: ...R5906141 02 Medea series 56 Input Communication...