Barco MDSC-8258, User Manual

Page: 23 / 44

5. Advanced operation
5. ADVANCED OPERATION
5.1 Monitor info
About monitor info
The available information items for your display are:
• Hardware release (HWREL)
• Firmware release (FWREL)
• Current output correction (OUT MODE)
• Current status of DVI 5V power input (DVI PWR IN)
• Current status of DVI 5V power output (DVI PWR OUT)
• Expected remaining life-time (in hours) of LCD panel lamps (REMAIN LIFE)
To view the monitor info
1. Bring up the OSD main menu.
2. Navigate to the Monitor info menu.
3. Enter the Monitor info submenu.
The different information items are shown.
5.2 Input channel menu
Overview
• Act Input
• Out power
5.2.1 Act Input
About Act Input
Possibility to select one of the two input pairs (1 - 3 or 2 - 4)
To select an input
1. Bring up the OSD main menu.
2. Navigate to the Input Channel menu.
3. Enter the Input Channel menu.
4. Navigate to the Act Input submenu.
5. Enter the Act Input submenu.
6. Select one of the available pro fi les and con fi rm.
5.2.2 Out power
About out power
This allows to enable or disable the 5Vdc output on pin 16 of each DVI connector to power, i.e. external
signal conversion dongles.
(451920611502) K5902088 MDSC-8258 08/09/2014 21