![background image](http://html.mh-extra.com/html/barco/mdsc-8255-12g/mdsc-8255-12g_user-manual_473705055.webp)
55
R5913964 /00
MDSC-8255
6.3 Biological hazard and returns
Overview
The structure and the specifications of this device as well as the materials used for manufacturing makes it
easy to wipe and clean and therefore suitable to be used for various applications in hospitals and other
medical environments, where procedures for frequent cleaning are specified.
However, normal use shall exclude biological contaminated environments, to prevent spreading of infections.
Therefore use of this device in such environments is at the exclusive risk of Customer. In case this device is
used where potential biological contamination cannot be excluded.
Customer shall implement the decontamination process as defined in the latest edition of the ANSI/AAMI
ST35 standard on each single failed Product that is returned for servicing, repair, reworking or failure
investigation to Seller (or to the Authorized Service Provider). At least one adhesive yellow label shall be
attached on the top site of the package of returned Product and accompanied by a declaration statement
proving the Product has been successfully decontaminated.
Returned Products that are not provided with such external decontamination label, and/or whenever such
declaration is missing, can be rejected by Seller (or by the Authorized Service Provider) and shipped back at
Customer expenses.
6.4 Cleaning instructions
To clean the display
Apply a cleaning/disinfecting product to a soft lint-free cloth, such as a microfiber or gauze and rub the display
surface thoroughly. In order to be effective, all surfaces must be cleaned for a certain amount of time (ranging
from 30 seconds to 2 minutes).
Use a cleaning/disinfecting product that is alcohol-, alkali-, water- or chlorine-based. Common examples are:
•
Isopropanol 100%
•
Ethanol 70%
•
0.5% Chlorehexidine in 70% ethanol/isopropanol
•
Ortho-Phthalaldehyde (OPA) 0.55%
•
Haemo-sol, 1% in water
•
250 ppm Chlorine solution
•
1.0% lodine in 70% ethanol
•
1.6% aqueous ammonia
•
“
Green soap
”
(USP)
•
0.5% Chlorehexidine in 70% isopropyl alcohol
•
Products similar to optical cleaning liquid
•
Bacillol AF
•
Flux
•
Sodium hypochlorite 10%
When selecting an alternative cleaning/disinfecting product, it is recommended to always identify the active
ingredients. In case of doubt about a certain cleaning product, use plain water.
Do not use any of the following products:
•
Alcohol in concentrations > 70%
•
Strong alkalis lye, strong solvents
•
Acetone
•
Toluene
•
Acids
•
Detergents containing fluoride
•
Detergents containing ammonia
•
Detergents containing abrasives
•
Steel wool
•
Sponge with abrasives
Summary of Contents for MDSC-8255 12G
