Barco MDSC-2324 DDI, User Manual

Page: 57 / 78

K5903252 (451920612633) /02 MDSC-2324
57
Main picture 2nd picture
DVI Output option
“ DVI ” “ Nexxis ” “ None ”
Nexxis Yes Yes Yes
Other Yes Yes Yes
To select the DVI output
1. Bring up the OSD main menu.
2. Navigate to the System menu.
3. Enter the DVI output submenu.
4. Select one of the available options and confirm.
5.5.5 Keyboard lock
About keyboard locking
This setting allows you to disable the keyboard functionality and avoid unwanted access to the OSD functions.
Accessing the OSD menu is only possible after pressing a sequence of keys. Please refer to the dedicated
section for more details (Keyboard locking/unlocking).
To enable/disable keyboard locking
1. Bring up the OSD main menu.
2. Navigate to the System menu.
3. Enter the Keyboard Lock submenu.
4. Enable/Disable keyboard locking as desired and confirm.
5.5.6 Keyboard backlight
About the keyboard backlight
By default, after lighting up, the keyboard backlight will dim again if no further actions are taken within the
following 5 seconds. However, this behavior can be changed so that the keyboard backlight is always on.
To adjust the keyboard backlight
1. Bring up the OSD main menu.
2. Navigate to the System menu.
3. Enter the Keyboard Backlight submenu.
4. Select one of the available options and confirm.
5.5.7 Power Saving
About power saving
When the active input(s) is (are) missing, this setting allows the display to switch off the backlight and enter a
low power mode. In this status the availability of the selected input is checked periodically.
The unit can exit from power save mode in two cases:
1. When a signal is applied on the selected input (or any input in case of auto).
2. By activating the OSD menu, see “ OSD menu activation ” , page 33.
To enable/disable power saving
1. Bring up the OSD main menu.
Advanced operation