Barco MDSC-2242, User Manual, Page: 24 / 64

K5903030 (451920611336) /05 MDSC-2242
24
To connect your MDSC-2242 to Barco's Nexxis OR system, connect the 10Gb Ethernet interface to your
Nexxis switch. More info about Nexxis OR and how to configure the MDSC-2242 in your network is available
in the dedicated user guides. Please visit
www.barco.com to obtain these user guides.
Nexxis OR is only available on the MDSC-2242 MNA version.
3.5 Power supply connection
WARNING: When the display is assembled in the medical system, take care of the fixation of all
cables, to avoid unwanted detachment.
To connect the power supply & protective earth pin
1. Connect the power input of your MDSC-2242 display into a grounded power outlet by means of the proper
power cord delivered in the packaging.
2
1
Image 3-6
2. The MDSC-2242 display is provided with an additional protective earth pin, if necessary connect the earth pin
to a grounded outlet by means of an AWG18 (max. 6ft / 1,8m long) wire.
3.6 Potential equalization
About potential equalization
When potential equalization between the display and other devices is required then connect the potential
equalization pin (POAG: DIN 42801) to the potential equalization terminal of the equipment.
3.6.1 MDSC-2242 LED version
To connect the potential equalization pin
1. Connect the potential equalization pin (POAG: DIN 42801) to the potential equalization terminal of the
equipment.
Image 3-7
Display installation