Barco MDSC-2242 User Manual Download Page 54

Page: 54 / 64

K5903030 (451920611336) /05

MDSC-2242

6.6 Explanation of symbols

Symbols on the device

On the device or power supply, you may find the following symbols (nonrestrictive list):

Indicates the device meets the requirements of the applicable EC directives.

Indicates compliance with Part 15 of the FCC rules (Class A or Class B)

Indicates the device is approved according to the UL Recognition regulations

E160779

Indicates the device is approved according to the UL regulations for Canada and US

Indicates the device is approved according to the UL Demko regulations

S&E

Indicates the device is approved according to the CCC regulations

Indicates the device is approved according to the VCCI regulations

Indicates the device is approved according to the KC regulations

Indicates the device is approved according to the BSMI regulations

Indicates the device is approved according to the PSE regulations

Indicates the device is approved according to the RCM regulations

Indicates the device is approved according to the EAC regulations

Caution: Federal law (United Stated of America) restricts this device to sale by or on
the order of a licensed healthcare practitioner.

IS 13252 (Part 1)

IEC 60950-1

R-xxxxxxxx

www.bis.gov.in

Indicates the device is approved according to the BIS regulations

Indicates the USB connectors on the device

Important information

Summary of Contents for MDSC-2242

































































Search results

Summary of Contents for MDSC-2242

Reviews:

Barco MDSC-2242, User Manual, Page: 54 / 64

Search results

Summary of Contents for MDSC-2242

Reviews: