Barco MDPC-8127, User Manual, Page: 29 / 52

29 R5913216 /03 MDPC-8127
4.8.2 Color coordinates
About color coordinates:
It is possible to change the color coordinates of your display.
Color coordinates can only be changed when the Color preset is set to User.
To change the color coordinates:
1. Bring up the OSD main menu.
2. Navigate to the
Configuration > Calibration > Color Settings > Color Presets menu.
3. Select User and confirm.
4. Enter the Color Definition submenu, select Color Coordinates and confirm.
5. Enter the x and y submenus, set the values as desired and confirm.
4.9 Color space
About color space
The available color space settings for your display are:
• sRGB: A standard Red/Green/Blue color space that is most common for color monitors and is the default
setting for the MDPC-8127. Note: This setting does not fully set your display to the sRGB color space.
Refer to “ sRGB ” , page 30 to do this.
• Native: The native and widest color space gamut available on the MDPC-8127, for expanded color options
in Digital Pathology.
• PrePriAS (Preserve Primaries And Secondaries): To change the white (color) point (as explained in
“ Color presets ” , page 28 ) without reducing red, green and blue primary colors and cyan, magenta and
yellow secondary colors of the display's native color gamut. Selecting the PrePriAS color space optimizes
SteadyColor
™ , a color calibration technique that complements DICOM images by providing clear Just
Notable Differences (JND ’ s) for both grayscale and color medical images. SteadyColor calibration is
activated by Barco ’ s QAWeb Enterprise Quality Assurance and Compliance software solution.
To select a color space
1. Bring up the OSD main menu.
2. Navigate to the
Configuration > Calibration menu.
3. Enter the Color Space submenu.
4. Select one of the available color space settings and confirm.
4.10 Viewing modes
About viewing modes
The MDPC-8127 can be used in 2 viewing modes:
• Diagnostic: This mode provides the full calibrated luminance and is intended for using the display for
diagnostic purposes.
• Text: In this mode, the luminance is reduced to approximately half of the luminance. This is intended for
using the display with office applications such as word processing.
Please note that text mode is not persistent, once powered off, the unit will restart in diagnostic mode.
The diagnostic mode should always be selected when the MDPC-8127 is intended to be used in a
diagnostic environment.
To select a viewing mode:
1. Bring up the OSD main menu.
Advanced operation