5. Important information
5. IMPORTANT INFORMATION
5.1
Safety information
General recommendations
Read the safety and operating instructions before operating the device.
Retain safety and operating instructions for future reference.
Adhere to all warnings on the device and in the operating instructions manual.
Follow all instructions for operation and use.
Electrical Shock or Fire Hazard
To prevent electric shock or
fi
re hazard, do not remove cover.
No serviceable parts inside. Refer servicing to quali
fi
ed personnel.
Do not expose this apparatus to rain or moisture.
Modi
fi
cations to the unit
Do not modify this equipment without authorization of the manufacturer.
Type of protection (electrical)
Monitor with internal power supply: Class I equipment.
Degree of safety (
fl
ammable anesthetic mixture)
Equipment not suitable for use in the presence of a
fl
ammable anesthetic mixture with air or with oxygen
or nitrous oxide.
Non-patient care equipment
•
Equipment primarily for use in a health care facility that is intended for use where contact with a patient
is unlikely (no applied part).
•
The equipment shall not be used with life support equipment.
•
The user should not touch the equipment, nor its signal input ports (SIP)/signal output ports (SOP)
and the patient at the same time.
Power connection – Equipment with internal power supply
•
Power requirements: The equipment must be powered by the AC mains voltage and must be con-
nected to a mains socket with earth connection.
•
The equipment is intended for continuous operation.
Transient over-voltage
If the device is not used for a long time, disconnect it from the AC inlet to avoid damage by transient
over-voltage.
To fully disengage the power to the device, please disconnect the power cord from the AC inlet.
High magnetic environment
•
The device shall not be used in the high magnetic environment of an MRI scanner.
•
The installer shall assess the magnetic environment before installation or use of the device.
K5902134 NIO COLOR 2MP 23" 05/07/2017
21
