3. Operation
•
Gamma 1.8
or
2.2
: Select one of these display functions in case the display is to replace a CRT display
with a gamma of 1.8 or 2.2 respectively.
•
QAWeb:
This setting is automatically selected when the display function is determined by Barco’s
MediCal QAWeb application. Manually selecting the
QAWeb
display function is not recommended.
The settings of the display must be adapted to suit the requirements of the visualization
software. In case of doubt, please contact the vendor of the visualization software.
To select a display function
1. Bring up the OSD main menu.
2. Navigate to the
Adjustments
>
Display function
menu.
3. Select one of the available display functions and con
fi
rm.
3.9
White point selection
White point selection is disabled when
sRGB
is selected in the
Adjustments
menu.
About white point selection
This setting allows you to modify the display white point, used as reference for all other colors to be dis-
played.
The available white point settings for your display are:
•
Native
: The native, unmodi
fi
ed color temperature of the LCD panel.
•
6500K
: Corresponds to a color temperature of 6500 Kelvin (D65).
•
7500K
: Corresponds to a color temperature of 7500 Kelvin (D75).
To select the white point
1. Bring up the OSD main menu.
2. Navigate to the
Adjustments
>
White point
menu.
3. Select one of the available white point presets.
3.10 Power save mode
About power save mode
Enabling power save mode on your Nio Color 2MP 23" will optimize the display lifetime by automatically
switching off the backlight when no video signal is detected after approximately 10 seconds.
To enable/disable power save mode
1. Bring up the OSD main menu.
2. Navigate to the
Adjustments
>
Settings
menu.
3. Enter the
Power save
submenu.
4. Select
On
or
Off
as desired and con
fi
rm.
16
K5902134 NIO COLOR 2MP 23" 05/07/2017
