![background image](http://html1.mh-extra.com/html/barco/mdcc-4430/mdcc-4430_user-manual_4029393012.webp)
R5911227 /05
Coronis Fusion 4MP / 6MP
12
Note:
The MDCC-4430, MDCC-6530 can have multiple video inputs connected at once, and switching
between these inputs can be easily done in the OSD menu. See
“Image source selection”, page 31
for
more info on how to configure the different video inputs on your display.
3. The DisplayPort OUT allows you to daisy chain your display and an external display using DisplayPort
Multi-Stream Transport (MST).
Note:
By default, the DisplayPort OUT is covered with a plastic cap which has to be removed before you
can use this connector.
4. Connect the workstation's USB host to the USB upstream connector on the display if you want to make
use of QAWeb or any of the display USB downstream connectors (e.g. to connect a keyboard, mouse,
touchpad or another peripheral).
Note:
When cables or other objects are left on a touchpad, these can be misinterpreted as fingers and may
block DPMS activation. Barco recommends to always keep the touchpad clear of other objects.
5. Connect the supplied mains cable to the power input on the display.
2
3
4
4
2
5
DP IN 2
SERVICE
DP OUT
DP IN 1
USB DOWN
USB UP
AC IN
Image 2–5
6. Route all cables through the cable duct in the stand of your display. For better strain-relief and shielding of
the cables, use the cable clips at the inside of the connector compartment.
7. Close the connector compartment. Slide the top of the connector compartment cover into position and then
push the bottom of the cover.
Note:
Make sure that the power switch (next to the power input) is the desired position before closing the
connector compartment.
8. Connect the supplied mains cable to a
grounded
power outlet.
2.4 MXRT driver and Intuitive Workflow Tools
installation
About
When you are using a Barco MXRT display controller, you can start up your Coronis Fusion 4MP / 6MP
display system and install the
MXRT driver
and
Intuitive Workflow Tools
. Barco’s Intuitive Workflow Tools
are designed to increase visibility of subtle details, improve focus during reading sessions, and accelerate
workflow.
To install the MXRT driver and Intuitive Workflow Tools
1. Switch on your Coronis Fusion 4MP / 6MP as described in
2. Turn on the workstation connected to your display.
Your display will be running in a basic video mode at a default refresh rate when first time starting up.
3. Download the latest MXRT driver and Intuitive Workflow Tools from
Summary of Contents for MDCC-4430
