10. Expert operation
10.3.4 Color
fi
ne tuning
C
AUTION
:
Color
fi
ne tuning may only be done by Barco trained and quali
fi
ed engineers.
Single channel setup
Each projector is color calibrated during production. This means that devices in single channel setup need no color
fi
ne tuning.
However to switch to a different color reproduction or color temperature, the color coordinates of the white point (W) can be changed
in the active Dynacolor set.
Multiple channel setup
In a multiple channel setup, it might be needed to match the colors amongst all devices. To do so, the color coordinates for a
common color triangle are calculated from the native (i.e. measured) color coordinates for R, G, B and W of each projector and
entered as desired coordinates in the appropriate Dynacolor set. After applying a common triangle, some
fi
nal color
fi
ne tuning might
be required to come to a fully color matched overall image.
Fine tuning the color of the projected image
1. Check to see what Dynacolor Set is currently active:
Display setup > Dynacolor > Active set
: the set that has the radio button is
the active set.
2. In the OSD, navigate to the active Dynacolor set:
Display setup
>
Dynacolor
>
Adjust set
>
Set 1...
or
Set 2...
or .....
Image 10-63
3. Press
ENTER
to con
fi
rm your selection.
In this case, we have used
Set 1
.
4. In the
Dynacolor Set 1
dialog, enter a well-considered new value for
X
and/or
Y
of
White
.
152
R5909056 MCM-400 HFR 11/05/2016
Summary of Contents for MCM-400 HFR
