background image

VIDEO ROUTING

Gain

Unity

Bandwidth

350 MHz (-3dB), fully loaded (one input driving all outputs)

Crosstalk

-80dB @ 1 MHz, -65dB @ 10 MHz, -55dB @ 30 MHz, -42dB @ 100 MHz

Switching speed

100 us to 4 seconds (programmable)

VIDEO INPUT

Number/signal type

12, 16 or 32 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, 
composite video

Connectors

12, 16, 32 x 5 are female

Minimum/maximum levels

Analog-0.5V to 1.85V p-p with no offset

Impedance

75 ohms

Return loss

-30dB @ 5 MHz

Maximum DC offset (Vin=1Vpp)

+1.8V, -.6V

VIDEO OUTPUT

Number/signal type

4, 8, 16 or 32 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, 
composite video 

Connectors

4, 8, 16 x 5 BNC female

Minimum/maximum level

2V p-p

Impedance

75 ohms

Return loss

-30dB @ 5 MHz

DC offset

± 5mV maximum with input at 0 offset

Switching type

RGB delay up to 4 seconds

SYNC

Input/output type 

RGBHV, RGBS, RGsB, RsGsBs 

Input level

0.5V to 5.0V p-p, 2.5V p-p normal

Output level 

AGC to TTL: 4V to 5V p-p

Input/output impedance

75 ohms 

Polarity

Positive or negative (follows input)

AUDIO ROUTING

Gain

-84dB to +15dB 

Frequency response

20 Hz to 20 kHz, ±0.05dB THD +

Noise

0.03% @ 1 kHz at rated maximum output drive

S/N

>90dB, balanced, at rated maximum output drive (21dBu)

Crosstalk

<-80dB @ 1 kHz, fully loaded stereo channel separation >80dB @ 1 kHz

CMRR

>75dB @ 20 Hz to 20 kHz

AUDIO INPUT

Number/signal type

8, 12, 16 stereo, balanced/unbalanced

Connectors

8, 12 or 16 3.5 mm captive screw connectors, 5 pole

Impedance

10 kohm balanced or unbalanced, DC coupled

Maximum level

+19.5dBu, (balanced or unbalanced) at stated %THD+N 

AUDIO OUTPUT

Number/signal type

4, 8, 16 stereo, balanced/unbalanced

Connectors

8, 12, 16 3.5 mm captive screw connectors, 5 pole

Output gain adjustment

-84dB to +15dB, adjustable per input by RS-232/485 or front

Impedance

50 ohms unbalanced, 100 ohms balanced

Gain error

±0.1dB channel to channel

Maximum level (Hi-Z)

>+21dBu, balanced or unbalanced at stated %THD+N

Maximum level (600 ohm)

>+15dBm, balanced or unbalanced at stated %THD+N • NOTE: 0dBu = 0.775 volts (RMS)

MatrixPRO specifications

Barco Events

11101 Trade Center Drive, Rancho Cordova, CA 95670 - USA

Tel. +1 916 859-2500 - Fax +1 916 859-2515

Noordlaan 5, 8520 Kuurne - Belgium

Tel. +32 56 36 80 47 - Fax +32 56 36 88 24

email: [email protected]

Ref.no. R599805 - July 2004

www.barco.com

www.events.barco.com

BR MatrixPRO july04.qxd  19-08-2004  15:58  Pagina 1

Reviews: