Barco iQ Reality 500 Owner'S Manual Download Page 41

Page: 41 / 141

4. Getting started

Image 4-10

The message will dissapear after 2 minutes, it can also be escaped.

The projector will switch to single lamp mode and displays an icon (right top corner of the screen) representing a crossed out lamp,
that way informing the user of an earlier lamp error.

The icon can always be removed via the

Clear lamp error

function in the

Lamp

menu.

ARNING

In case of lamp error contact a Barco authorized technician.

4.6

Quick set up adjustments

Overview

•

Quick lens Adjustment

•

Using the RCU

4.6.1

Quick lens Adjustment

What can be done ?

For a quick lens set up and image shift, use the RCU dedicated keys or the lens button on the local keypad

Zoom/focus are only available for motorized lenses.

Quick zoom/focus adjustment

1. Press

LENS ZOOM

LENS FOCUS

on the RCU

2. Use the arrow keys to adjust

Quick shift adjustment

1. Press

LENS SHIFT

2. Use the arrow keys to adjust

4.6.2

Using the RCU

Pointing to a reflective screen

1. Point the front of the RCU to the reflective screen surface. (image 4-11)

R5976693 BARCOIQ REALITY 500 01/02/2007

Summary of Contents for iQ Reality 500














































































































































Search results

Summary of Contents for iQ Reality 500

Reviews:

Brands by name

Popular brands

Barco iQ Reality 500, Owner'S Manual

Search results

Summary of Contents for iQ Reality 500

Reviews:

Brands by name

Popular brands