Barco iQ PRO G500, Owner'S Manual

Page: 143 / 195

14. IQ Network
14.5 Control
Overview
• Description
• How to use the control manager?
• General
• The source selection screen
• The PiP screen
• Image settings
• Advanced control
14.5.1 Description
What can be done ?
The projector allows a software client (client PC) to communicate locally with the server and hereby control the projector’s settings,
in this case one has a
point to point communication, image 14-25. The client PC or laptop communicating with the projector may
be locally installed or may be remote, communication may then happen over a LAN, image 14-26
The projector performs the role of Server while the PC acts as a Client within the system.
The control and management client software incudes the possibility to create groups of projectors and that way control a whole fleet
of projectors.
A
B
Image 14-25
point to point iQ Pro network communication
A facility manager’s desk
B projector area
LAN
A : facility manager's desk
B : projection areas
...
Image 14-26
control & management of network centric projector(s)
A facility manager’s desk
B projector area
What can be controlled ?
Almost every menu item can be controlled through the control manager
R5976491 IQ PRO G500 01/02/2007 137