![background image](http://html1.mh-extra.com/html/barco/iosono-one-series/iosono-one-series_installation-and-user-manual_3882298023.webp)
5. Play Config Software
5.4.3
Network Tab
Network Tab
1
2
3
6
4
5
7
8
Image 5-7
Network tab in system setup of Play Con
fi
g
Item No.
Element
Function
1
IP Address
IP Address of the IOSONO ONE. Factory setting is 192.168.1.1
2
Net Mask
Subnet Mask for the IP connection. Factory setting is 255.255.255.0
3
Gateway
Network Gateway for the IP connection Factory setting is 0.0.0.0
4
DHCP
Enables DHCP mode. Network settings will be adjusted automatically if a DHCP
server is present at the network. Factory setting is OFF
5
Remote Connection Type
TCP/IP, UDP/IP and COM/RS232 possible
6
Remote Port
Selection of the remote port for IP remote connections
7
Remote Terminate
Sequence
CR, LF or CR/LF possible
8
Reboot
Reboot the IOSONO ONE to resume network settings
Note: Changes of the remote control setting don´t require a reboot.
A table of all remote control commands can be found in chapter "Remote control from external media controllers", page 26.
R5906747 IOSONO ONE 16/05/2017
19
Summary of Contents for IOSONO ONE Series
