Barco Iosono Core R9801500, Installation And User Manual

Page: 15 / 65

5. Initial System Configuration
5. INITIAL SYSTEM CONFIGURATION
5.1 Hardware Connections
About
To enter the Control Unit and make con fi gurations, a remote computer (PC with Windows, laptop, ...) with Control Client installed and
ethernet connection between remote computer and IOSONO CORE is needed. Please see "System Startup", page 7 for further
details.
A standard system setup should be similar to the wiring scheme as shown in image 5-1.
Image 5-1
Standard wiring with 64 output channels via MADI
Start the Control Client, type in the target IP address of the IOSONO CORE and click on Connect . Enter the Control Unit software,
type in the password and click OK to con fi rm. The default password is )))
5.2 Create A Loudspeaker File
About
A loudspeaker fi le is always needed to setup presets or to execute the rendering process. It has to re fl ect the real loudspeaker
setup as closely as possible. Any deviation between the actual physical setup and the fi le will impair the rendering precision and the
overall sound quality. In this section we will describe how to create a loudspeaker fi le with example values.
To create a loudspeaker fi le for your actual setup you need to use real data.
Step-By-Step Guide
1. In the menu go to System - Options - Loudspeaker Setups - Create . A window is shown like in image 5-2.
2. Name your loudspeaker setup, for example 3D ls fi le
- Change Audience Area Height to 1.20m
- Keep all other default settings in the second line ( Screen , System Offset and Reference Point )
Note: The audience area de fi nes the area where the audience will be located. The height of the audience area refers to the
average ear level of the audience, which is usually 1.20m when seated and 1.70m when standing.
3. Create a speaker group with + in Groups
R5906746 IOSONO CORE 08/05/2017 11