Barco ImagePRO-4K, Safety Manual

Page: 3 / 90

3
About this chapter
Read this chapter attentively, it contains important information to prevent personal injury while using the
ImagePRO
– 4K video processor. It also includes several cautions to prevent damage to the ImagePRO – 4K
video processor. Ensure that you understand and follow all safety guidelines, safety instructions and warnings
in this chapter before using your ImagePRO
– 4K video processor.
Covered ImagePRO – 4K products
Product Contains Accessories included
R9004795 • 1x 14-9750004-90 • European Power Cord CEE7 (not included with units shipped to
China)
• 1x B1959864 • US Power Cord NEMA 5/15 (not included with units shipped to
China)
• 1x B1959865 • China Power Cord GB 2099 (only included with units shipped to
China)
• 1x R9871179 • Rear Rack Mount Support Kit, includes brackets, side support
plates, screws, and washers
• 2x 09-0904021-90 • Rear connector protectors
• 4x 13-0211010-90 • 8-32 x .38 Pan Head Screws for rear connector protectors (x2 per
protector)
• B561132 • USB Thumb Drive (Contains Users Guide, System Software and
Control GUI)
About this guide
Part number
Description
Level
R5906169 Safety Guide Any person that comes in contact
with the ImagePRO
– 4K product
A printed copy of the Safety Guide and Quick Start Guide is included in the ImagePRO – 4K box at
purchase. Please check online for the other documents.
Always check for the latest version of the manual at the following address. Click on the ImagePRO –
4K product page and go to the “ Downloads ” tab.
www.barco.com/en/Products-Solutions/Image-processing/Presentation-switchers
R5906169-00 ImagePRO – 4K
Safety guidelines
1