Barco iD LR-6 R9010342, User Manual

Page: 121 / 135

9. Maintenance
9. MAINTENANCE
9.1 Cleaning the lens
To minimize the possibility of damage to optical coatings, or scratches to lens surfaces, we have developed
recommendations for cleaning. FIRST, we recommend you try to remove any material from the lens by blowing
it off with clean, dry deionized air. DO NOT use any liquid to clean the lenses.
Necessary tools
Toraysee
TM
cloth (delivered together with the lens kit). Order number : R379058.
How to clean the lens ?
1. Always wipe lenses with a CLEAN Toraysee TM cloth.
2. Wipe lenses in a one single direction.
Warning: Do not wipe back and forwards across the lens surface as this tends to grind dirt into the coating.
3. Do not leave the cleaning cloth in either an open room or lab coat pocket, as doing so can contaminate the cloth.
4. If smears occur when cleaning lenses, replace the cloth. Smears are the fi rst indication of a dirty cloth.
C
AUTION
:
Do not use fabric softener when washing the cleaning cloth or softener sheets when drying the
cloth.
Do not use liquid cleaners on the cloth as doing so will contaminate the cloth.
Other lenses can also be cleaned safely with this Toraysee TM cloth.
9.2 Cleaning the dust fi lters
Overview
• Dust fi lters
• Cleaning
9.2.1 Dust fi lters
Location of the fi lters
There are 4 fi lters located at different positions
1. Filter1: Lamp 1
2. Filter2 : Lamp 2
3. Filter 3 : X-Cube fi lter
4. Filter 4 : Input fi lter
R59770134 ID LR-6 27/05/2011 117