5. Electronic spares and servicing procedures
3. Remove the bottom nut. Be careful not to drop the spring!
Tip:
Look at the position of the nut: it must be in the same position when remounting a new formatter (focus !).
Image 5-41
Lens holder and formatter: bottom view
4. Gently remove the formatter board. Do not remove the DMD from the formatter board.
Caution:
Do not touch the DMD and make sure to keep the DMD clean!
Caution:
Do not bend the formatter board, since this will cause damage to it!
5.7
The power box
Overview
•
•
•
5.7.1
Description
Description
Image 5-42
Power box: right side with connectors
50
R59770097 ID H250 / H500 15/05/2007
Summary of Contents for iD H250
