Barco iD H250, Service Manual, Page: 52 / 108

5. Electronic spares and servicing procedures
Image 5-37
PMP: screw and nuts fixing the PMP / input layer 1
4. Gently lift the PMP, while disconnecting the board-to-board connectors to remove it
Image 5-38
PMP: lift to remove it
5.6 The formatter
Overview
• Description of the formatter
• Replacing the formatter
5.6.1 Description of the formatter
Description
The formatter board is a digital image processing unit where the data is converted from 9 pairs of LVDS to 2x30 bits of digital
information to be sent to the DMD.
The formatter has two channels of 30 bits because of the high resolution of the DMD.
The main tasks of this formatter board are:
48 R59770097 ID H250 / H500 15/05/2007