![background image](http://html1.mh-extra.com/html/barco/id-h250/id-h250_owners-manual_4180871012.webp)
3. Installation
3.1
Battery installation in the RCU
How to install the battery
Two batteries are packed together with the RCU. Before using your RCU, install first these batteries.
1. Remove the battery cover on the backside by pushing the handle a little towards the bottom of the RCU.
2. Lift up the top side of the cover at the same time.
3. Insert the batteries as indicated in the RCU.
4. Put the battery cover on its place.
How to replace the batteries in the RCU
To replace the batteries :
1. Remove the battery cover on the backside by pushing the handle a little towards the bottom of the RCU.
2. Lift up the top side of the cover at the same time.
3. Push on the + side of the battery towards the - side
4. Lift up the battery at the same time.
5. Repeat for the second battery.
6. Insert the batteries as indicated in the RCU (battery type AA or LR6 or equivalent).
7. Put the battery cover on its place.
Image 3-2
3.2
Lens installation
How to install ?
1. Take the lens out of its packing material
2. Fix the lens by placing it in the housing
8
R59770079 BARCO ID H250/500 23/07/2007
Summary of Contents for iD H250
