Barco HDX series, User And Installation Manual, Page: 91 / 340

8. Input
Image 8-33
Main window
Image 8-34
Input, no signal
Image 8-35
2. Press ENTER to toggle between [1] , [3] , [5] and [10] minutes.
8.7.5 Auto Dimming
About auto dimming
When no signal is detected on the selected input the lamp power will be reduced from the current value to its minimum value. When
the input signal is re-detected, the lamp power is restored to its original value.
How to set up
1. Press Menu to activate the menus and select Input → No Signal . → Auto Dimming .
Image 8-36
Main window
Image 8-37
Input, no signal
R5905032 HDX SERIES 20/11/2014 87