Barco HDX series Installation Manual Download Page 270

Page: 270 / 351

14. Service

14.3.1 Versions

About versions

The table gives an overview between the reference software and the current installed software.

The reference software is the latest correctly installed package.

The current is the updated software (upgrade of downgrade).

Once the complete current is updated with new software, then this current becomes the new reference.

= means the that the current software is equal to the latest reference.

> the current has a higher version than the reference software.

< the current has a lower version than the reference software.

How to display an overview

1. Press

Menu

to activate the menus and select

Service

→

Diagnosis

→

Versions

Image 14-4
Main menu, service

Image 14-5
Service, diagnosis

Image 14-6
Diagnosis, versions

2. Press

ENTER

to display an overview of the versions.

266

R5905032 HDX SERIES 01/06/2011

Summary of Contents for HDX series
































































































































































































































































































































































Search results

Summary of Contents for HDX series

Reviews:

Brands by name

Popular brands

Barco HDX series, Installation Manual

Search results

Summary of Contents for HDX series

Reviews:

Brands by name

Popular brands