Barco HDX 4K User Manual Download Page 35

Page: 35 / 107

4. Lenses & Lens selection

The Lens Calculator window opens.

Image 4-9
Lens calculator

The Lens Calculator can also be used to determine the position of the projector when the lens type and screen
width is known.

Due to lens tolerances the results of calculated values may be different from measured values. These differ-
ence may vary +/- 5%.

4.3

Lens installation

ARNING

Only use TLD+ ZOOM lenses. Using other lenses can touch and damage the mechanics of the

build-in actuator! This can result in loud rattling noises and a damaged actuator.

How to install

1. Remove the foam rubber in the opening of the lens holder if not removed yet.

2. Do

not

remove the warning sticker from the lens holder.

3. Take the lens assembly out of its packing material and remove the lens caps on both sides.

4. Place the lens holder in the “unlocked” position by moving the lens lock handle (A) towards the lens power supply socket (B) as

illustrated.

R5906070 HDX 4K 23/09/2016

Summary of Contents for HDX 4K












































































































Search results

Summary of Contents for HDX 4K

Reviews:

Related manuals for HDX 4K

Brands by name

Popular brands

Barco HDX 4K, User Manual

Search results

Summary of Contents for HDX 4K

Reviews:

Related manuals for HDX 4K

Brands by name

Popular brands