![background image](http://html.mh-extra.com/html/barco/hdq-2k40/hdq-2k40_user-manual_474158062.webp)
5. Lenses & Lens Holder
Image 5-17
Shift adjustment
3. Use the
▲
or
▼
key to shift the lens in vertical direction.
Use the
◄
or
►
key to shift the lens in horizontal direction.
Press
ENTER
to switch to zoom/focus adjustment.
Via direct access keys on the remote control
1. Press
LENS FOCUS
button [-] or [+] (C) for an overall focus of the image.
2. Press
▲
LENS SHIFT
▼
button for correct vertical position of the image on the screen.
3. Press
◄
LENS SHIFT
►
button for correct horizontal position of the image on the screen.
Take into account that the lens focus may slightly drift while the lens is warming up from cold to operation
temperature. This is a typical phenomenon for projection lenses used with high brightness projectors. The
operation temperature of the lens is reached after approximately 30 minutes projection of average video.
5.8
Additional vertical shift of the Lens Holder
Introduction
The lens of the HDQ 2K40 can be shifted vertically. The maximum vertical shift range is ±110% in both directions, which is not
suf
fi
cient in some situations. To extend the vertical shift range in a certain direction, the Lens Holder can be shifted manually.
Extending the vertical shift range in a certain direction, will reduce the available range in the other direction.
Necessary tools
3 mm Allen wrench
How to shift the Lens Holder?
1. Remove the front projector cover. See "Removal of the front cover", page 310.
2. Loosen the 4 screws (1) until the central part of the Lens Holder becomes loose. Use a 3 mm Allen wrench.
3. Shift the central part up or down as desired. The lowermost, middle and uppermost shift positions are marked on the Lens Holder
with a little arrow (2).
4. Tighten the 4 screws (1) to a torque of
8.4 Nm
.
58
R5905303 HDQ 2K40 02/03/2015
Summary of Contents for HDQ--2K40
