![background image](http://html.mh-extra.com/html/barco/hdq-2k40/hdq-2k40_user-manual_474158130.webp)
10. Image
Image 10-36
Image settings, input balance
Image 10-37
2. Press
ENTER
to select.
3. Do you want to use an internally generated test pattern ?
If yes, use the
▲
or
▼
key to select
Adjustment Pattern
and press
ENTER
to toggle between [on] and [off]
If no, adjust on the selected source.
4. Use the
▲
or
▼
key to select
Red
below
Black balance
and press
ENTER
.
5. Adjust the red black level on a minimal value
6. Use the
▲
or
▼
key to select
Black balance blue
and adjust the blue black level on a minimal value.
Note:
This minimal value is not necessary , provided that the 2 other colors are not in
fl
uencing too much the color to be adjusted,
in fact the aim is to minimize the effect of the two other colors since there is a risk of reaching too soon the 50% transition
due to the contribution of these two other colors signals.
7. Use the
▲
or
▼
key to select
Black balance green
and adjust the Green black level until bright spots appear on the screen.
8. Use the
▲
or
▼
key to select
Black balance blue
and adjust the Blue black level until bright spots appear on the screen.
9. Use the
▲
or
▼
key to select
Black balance red
and adjust the Red black level until bright spots appear on the screen.
The projected image should now be noisy full black
If one uses a gray scale pattern, the bright spots should appear in the black bar.
Performing White input balance
1. Connect the source you want to project.
2. Press
Menu
to activate the menus and select
Image
→
Image Settings
→
Input Balance
.
Image 10-38
Main menu, Image
Image 10-39
Image adjustments
126
R5905303 HDQ 2K40 02/03/2015
Summary of Contents for HDQ--2K40
