Barco HDF-W30LP, User And Installation Manual

Page: 248 / 311

18. Projector Control
Image 18-52
Language selection
2. Use the ▲ or ▼ key to select the desired language and press ENTER to activate.
The radio button before the active language is checked. The menu content is changed to the new language.
18.13 Scheduler
About the scheduler
The scheduler allows to start up different tasks at a given time which can control the screen layout and the status of the light source.
These tasks can be scheduled in time with a certain recurrence and occurrence. Multiple tasks can be added to the list of tasks and
all these tasks will be controlled by the scheduler.
A simple example of a schedule:
• task1 : load layout 1 and switch on light source at the start of the day
• task2: switch to layout 2 at a certain hour. No changes for the light source.
• task3: light source off at the end of the day.
Follow the next topics to create, edit or delete a task.
Overview
• Add a task to the list
• Edit a task
• Delete task
• Scheduler, on or off
18.13.1 Add a task to the list
How to add
1. Press Menu on the remote control (RCU) or on the local keypad to activate the menus and select Projector Control → Scheduler
→ Add task .
Image 18-53
Scheduler, add task
2. Press ENTER to open the task creation window. The start date window is selected.
Use the ▲ or ▼ key to jump to the next item in the setup.
When all items are correctly fi lled out, select Apply and press ENTER to create the task.
244 R5906730 HDF WLP SERIES 01/08/2017