![background image](http://html1.mh-extra.com/html/barco/hdf-w22/hdf-w22_user-and-installation-manual_4170864141.webp)
8. Input
8.9.6
L-R Synchronisation,
fi
eld dominance
About
fi
eld dominance
The
Field dominance
setting has only effect in the 3D mode: Frame sequential - Single channel (in all other modes this setting is
grayed out). Furthermore, the input frequency must be equal or lower than 100 Hz (50 Hz per eye). In case the input frequency is
higher than 100 Hz (50 Hz per eye, 59.94 & 60 Hz in practice), the “Field dominance” setting has no effect.
For the lower input frequencies (40 Hz or lower/eye), triple
fl
ash is used and for frequencies between 40 and 51 Hz/eye double
fl
ashing is introduced and the coupling between the video input signal and the 3D SYNC IN signal must be determined.
This setting is stored per input.
How to activate
1. Press
Menu
to activate the menus and select
Alignment
→
3D Glasses
→
L/R Synchronisation
.
Image 8-72
Main menu
Image 8-73
Input, 3D
Image 8-74
L/R Synchronisation
2. Press
ENTER
.
3. Use the
▲
or
▼
key to select
Field Dominance
.
Image 8-75
Field dominance
4. Press
ENTER
to toggle between
[L/R]
and
[R/L]
[L/R] : The 3D SYNC IN signal is used to indicate the left and right
fi
eld sequence.
[R/L] : The inverted 3D SYNC IN signal is used to indicate the left and right
fi
eld sequence.
R5905158 HDF SERIES 08/12/2016
137
Summary of Contents for HDF W22
