Barco HDF W series, Use And Installation Manual

Page: 309 / 319

E. Stacking HDF series projectors
E. STACKING HDF SERIES PROJECTORS
General
Three interlocking adapters at the top and at the bottom of the HDF series projector allows an easy and fast stacking without using
extra tools or accessories.
W
ARNING
:
Maximum stack three (3) HDF series projectors in a table mount con fi guration.
Maximum stack two (2) HDF series projectors in a ceiling mount con fi guration.
• Stacking HDF series projectors
• Aligning stacked HDF series projectors
E.1 Stacking HDF series projectors
How to stack HDF series projectors ?
Turn in the four feet of the projector you want to stack.
Place the projectors on top of each other. Ensure that all three interlocking pins (A) match with their corresponding interlocking
sockets (B).
Tip: In case of stacking projectors for a ceiling mount con fi guration, fi rst turn the projectors upside down before placing the
projectors on top of each other.
A
B
B
A
Image E-1
Attach the two projectors together by closing all three interlocking adapters as illustrated.
A B
C D
Image E-2
Closing interlocking adapter
1. Are these projectors stacked for a ceiling mount con fi guration?
If yes, secure the projectors with safety chains as follows:
R5905158 HDF SERIES 16/06/2015 305