![background image](http://html1.mh-extra.com/html/barco/hdf-w-series/hdf-w-series_service-manual_474148081.webp)
5. Troubleshooting
Situation
Solution
Blocked fan.
Unblock the fan. Ensure that the fan can turn freely.
Damaged wire unit.
Check if the wire unit of the fan is not damaged. Repair if possible, otherwise replace
with new one.
Malfunction Fan Control board.
Replace the Fan Control Board. See "Replacing the Fan control board", page 278.
Fan end of life.
Replace the fan. See "Cold mirror fan", page 291.
20
1
Image 5-48
20
Image 5-49
Code 7901: “Fan speed cold mirror too low” (Warning)
Situation
Solution
Partial blocked Cold Mirror fan
(reference 1 image 5-48). Fan is still
turning but something slows down
the fan speed.
Unblock the fan. Ensure that the fan can turn freely.
Damaged wire unit (reference 20
image 5-48 and image 5-49)
Check if the wire unit of the fan is not damaged. Repair if possible, otherwise replace
with new one.
Malfunction Fan Control board.
Replace the Fan Control Board. See "Replacing the Fan control board", page 278.
Cold Mirror fan end of life.
Replace the fan. See "Cold mirror fan", page 291.
Code 7902: “Fan speed cold mirror too high” (Warning)
Situation
Solution
Malfunction Cold Mirror fan
(reference 1 image 5-48)
Replace the Fan. See "Cold mirror fan", page 291.
Malfunction Fan Control board.
Replace the Fan Control Board. See "Replacing the Fan control board", page 278.
Code 7903: “Fan speed cold mirror too high” (Error)
This error code is probably preceded by the warning code 7902: “Fan speed cold mirror too high”. The same troubleshooting table
can be applied to.
Code 7904: “Fan speed engine too low” (Error)
Situation
Solution
Wire unit (reference 20 image 5-50)
of the Light Processor fan (reference
1 image 5-50) disconnected.
Remove the Input & Communication unit and the projector top cover. Loosen the fan
inlet assembly (located between the Light Processor compartment and the Input &
Communication compartment) from the projector chassis to check if the wire unit of the
Light Processor fan is connected.
Wire unit of the fan (reference 20
image 5-49) disconnected from the
Power Distribution board.
Remove the Input & Communication unit and check if the wire unit is inserted in the
Power Distribution board
Blocked fan.
Unblock the fan. Ensure that the fan can turn freely.
Damaged wire unit.
Check if the wire unit of the fan is not damaged. Repair if possible, otherwise replace
with new one.
R5905312 HDF W SERIES 24/01/2013
77
Summary of Contents for HDF W series
