![background image](http://html1.mh-extra.com/html/barco/hdf-w-series/hdf-w-series_service-manual_474148165.webp)
10. Card Cage
10.12 Replacing the LCD Display Interface
This procedure assumes that the Input & Communication unit is already removed from the projector.
Necessary tools
•
T10 Torx driver.
•
Small
fl
at screwdriver.
How to replace the LCD Display Interface?
1. Remove the complete PMP board assembly from the Input & Communication unit. See
fi
rst steps of the service procedure
"Replacing the PMP board", page 156.
2. Disconnect the gray (reference 4 image 10-29) and the red cable (reference 5 image 10-29) from the LCD Display Interface.
4
5
Image 10-29
3. Disconnect the small
fl
ex cable (reference 1 image 10-30) of the LCD Display from the LCD Display Interface board. Ensure to
disconnect the small
fl
ex prior to disconnect the large
fl
ex (reference 2 image 10-30).
Caution:
Open the latch of the socket prior to pull out the
fl
ex cables. Note that the latch of the smallest socket (reference 1
image 10-30) pivots upwards!
2
1
1
Image 10-30
4. Disconnect the large
fl
ex (reference 2 image 10-31) of the LCD Display from the LCD Display Interface board. Unlock the latch
of the cable socket before pulling out the
fl
ex cable.
R5905312 HDF W SERIES 24/01/2013
161
Summary of Contents for HDF W series
