![background image](http://html1.mh-extra.com/html/barco/hdf-w-series/hdf-w-series_installation-manual_474143051.webp)
5. Getting started
Ind.
Key name
Description
16
TEXT
Toggle key to activate or deactivate on screen text boxes while adjusting a setting.
When adjusting one of the image controls, e.g. during a meeting, the normally displayed
bar scale can be deactivated by pressing ’TEXT’ key
fi
rst. To re-display the bar scale
on the screen, press ’TEXT’ key again. When TEXT is ’off’, no adjustment menu’s
will be displayed on the screen when entering the adjustment mode. All menus and
adjustments remain active on the local LCD panel.
17
ENTER
Key to con
fi
rm an adjustment or selection in the adjustment mode.
18
Cursor keys
To make menu selections when in the adjustment mode
19
EXIT
Key to go one menu stage higher than the actual position when in the adjustment mode.
20
WINDOW
Selection of the active window “Main” or “PiP”
21
PIP
Direct access key for picture in picture selection.
22
Info
Displays help information when on a certain menu item of the sofrware
23
RC Operating indication
Lights up when a button on the remote control is pressed. (This is a visual indicator to
check the operation of the remote control)
Table 5-1
5.3
Power on projector
How to power on.
1. Press the power switch at the back of the projector to switch on this projector. (image 5-2)
-
When ’0’ is pressed, the projector is switched off.
-
When ’1’ is pressed, the projector is switched on.
The projector starts up in standby. The menus are accessible via the local LCD panel.
The start up screen is displayed on the local LCD panel and when fully started up, it changes to the overview screen.
This screen indicates :
-
the selected Main input
-
the selected PIP input
-
the IP address
-
the Customer Id
-
the Lamp status
-
the Mains voltage
-
the current ambient temperature
-
the Text status (OSD)
To display an image, the standby key must be pressed once.
R5905158 HDF W SERIES 10/07/2012
47
Summary of Contents for HDF W series
