![background image](http://html1.mh-extra.com/html/barco/graphics-908/graphics-908_owners-manual_474140079.webp)
7. Service Mode
The
Baudrate
menu will be displayed, the actual Baudrate will be highlighted.
BAUDRATE
Select new
baudrate:
38400
19200
9600
4800
2400
1200
Select with arrow
keys:
<ENTER> to accept
<EXIT> to return
Menu 7-14
2. Push the
↑
or
↓
keys to highlight the desired Baudrate and press
ENTER
to confirm.
3. Press
EXIT
to return to the
Projector Set-Up
menu.
7.3.7
Projector Warm Up
Overview
•
•
•
•
7.3.7.1 Starting Up Projector Warm Up
Why a projector Warm Up?
To perform in optimum conditions the projector needs to be warmed up.
What is done during the Warm Up period?
When in the Warm Up mode is set to On (and the CRT run in cycle is Off) the projector starts up with a warm up period, a warm up
menu will be displayed, this menu offers the possibility to skip the warm up period by pressing the
EXIT
key and offers the possibility
to adjust the horizontal and vertical amplitude of this white image with the cursor keys. During this warm up period, a full white image
is shifted on the CRT faceplate to avoid a burn in. Every 30 seconds a text box will be displayed in another place on the screen with
the remaining time to go.
When
EXIT
is pressed during this warm up period, the warm up menu will be redisplayed with the remaining time indication. Press
another time
EXIT
to interrupt the warm up cycle.
Which Warm Up settings can be adjusted?
The projector will start up with a warm up period to perform in optimum conditions.
Following warm up settings can be adjusted:
•
Warm Up Mode On/Off.
•
Warm Up Frequency of the warm up source.
•
Warm Up Time.
How to start up Projector Warm Up settings?
1. Push the
↑
or
↓
keys to highlight
Projector Warm Up
and press
ENTER
to select.
PROJECTOR SET-UP
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
PROJECTOR WARM UP
POWER UP MODE: operating
COMMON ADDRESS: 0
ABL CONTROLLER
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 7-15
The
Projector Warm Up
menu will be displayed.
R5976633 BARCO GRAPHICS 908 / BARCO REALITY 908 05/06/2003
75
Summary of Contents for Graphics 908
