Barco Galaxy WARP 7 HC, Owner'S Manual

Page: 61 / 154

6. Random Access
Serial File Load
1. Push the cursor key ↑ or ↓ to highlight
Serial File Load
. (menu 6-29)
2. Press
ENTER
to toggle between [OFF] or [ON].
This Serial File Load setting is default set to [OFF].
[OFF] The Serial File Load command is set to off.
[ON] The projector is forced to load a file through RS232, all other means to load a file are disabled until Serial File
Load is set to off.
FILE OPTIONS
FILE SORT [NAME]
FILE LOAD [AUTOMATIC]
SERIAL FILE LOAD [OFF]
Select with
↑
or
↓
<ENTER> to accept
<EXIT> to return
Menu 6-29
6.4 Picture Tuning
Overview
• Starting Up Picture Tuning
• Gamma
• Input Balance 1
• Input Balance 2
• Windowing
6.4.1 Starting Up Picture Tuning
How to Start Up Picture Tuning?
1. Push the cursor key ↑ or ↓ to highlight
Picture Tuning
.
2. Press
ENTER
to select.
The
Picture Tuning
menu will be displayed. (menu 6-30)
PICTURE TUNING
GAMMA
INPUT BALANCE 1
INPUT BALANCE 2
WINDOWING
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 6-30
6.4.2 Gamma
What can be done?
With the gamma correction adjustment, it is possible to match the Gamma of the IG and the Projector.
R5976755 BARCO GALAXY WARP™ 7 HC 05/04/2004 57