Barco Galaxy WARP 7 HC, Owner'S Manual

Page: 47 / 154

5. Getting Started
How to set the RCU Address?
1. Press the recessed
Address
key with a pencil. (image 5-11)
The Projector Address for every projector in the room will be displayed as a 3 digit code in a text box on the screen.
2. Enter the RCU Address by pressing a single digit key, within 5 seconds after pushing the address key.
Note: If the Projector Address displays ’003’ press the digit key 3 on the RCU. Do not enter the 3 digit code ’003’, this will set
the RCU to address ’0’.
Note: If no digit is entered within 5 seconds the RCU will return to the default ’0’ address.
F1
F2
F3
F4
F5
ADJ
EXIT
ENTER
PAUSE
PHASE
TEXT
SHARPN
TINT
COLOR
BRIGHTN
CONTR
TREBLE BALANCE
BASS VOL
9 0
7
8
5 6
3 4
1 2
Image 5-11
Address Key
5.6.4 Input Selection
How to select the desired input?
1. Press the digit key on the RCU corresponding with the desired input.
Digit Key
Type of Input
1
5x BNC Cable Input
2 DVI Input
Table 5-3
Input Selection
5.6.5 Picture Controls
How to use Picture Controls?
1. Push the
+
or
–
key of the desired Picture Control e.g. ’brightness’. (image 5-12)
A text box with a bar scale indication and function name of the control, e.g. ’brightness’ appears on the screen. The length of
the bar scale and the value of the numeric indication indicate the current memorized setting for this source. The length of the bar
scale and the value of the numeric indication will change whenever an adjustment is made. (image 5-13)
BRIGHTN
F1
F2
F3
F4
F5
ADJ EXIT
ENTER
PAUSE
PHASE
TEXT
SHARPN
TINT
COLOR
BRIGHTN
CONTR
TREBLE BALANCE
BASS VOL
9 0
7 8
5 6
3 4
1 2
Image 5-12
Picture Control key
Brightness 50
Image 5-13
Barscale indication
R5976755 BARCO GALAXY WARP™ 7 HC 05/04/2004 43