Barco Galaxy WARP 7 HC, Owner'S Manual

Page: 40 / 154

5. Getting Started
Lamp Run time indication
see chapter "4. Connections", "Switching On", page 19
Lamp Light output indication
see chapter "4. Connections", "Switching On", page 19
5.3.2 Switching to standby
How to switch to standby?
1. Press
Standby
to switch the projector to standby.
Switching to Standby. When the projector is running and you want to go to standby, press the standby key for
2 seconds until the message ’Saving data, please wait’ is displayed. Do not press any longer on the standby
key otherwise the projector will restart.
5.3.3 Switching off
How to switch off the projector?
1. Press first
Standby
.
2. Let cool down the projector until the fans stop blowing, at least 15 min.
3. Switch off the projector with the power switch.
5.3.4 Temperature error DMD
Overview
When the temperature of one of the DMD is too low or too high the projector will be switched automatically to standby. Before
switching to standby, the following message appears for 3 seconds on the screen : ’DMD out of operating temperature range.
Automatic shutdown is activated.’.
A ’-t’ appears on the LED display to indicate the user that the projector is switched to standby due to DMD temperature problems.
Operating temperature range of the DMD : +10°C and +35°C.
ERROR
DMD out of operating
temperature
range
Automatic shutdown is
activated
Menu 5-1
5.4 Quick Set Up Adjustments
Overview
• Quick Lens Adjustment
• Quick OSD Color Change
5.4.1 Quick Lens Adjustment
What can be done?
This will adjust the zoom, focus, horizontal shift and vertical shift settings of the lens.
36 R5976755 BARCO GALAXY WARP™ 7 HC 05/04/2004