![background image](http://html1.mh-extra.com/html/barco/galaxy-nw-r9040406/galaxy-nw-r9040406_user-manual_474123187.webp)
6. Maintenance
Image 6-7
Fan outlet: lift to remove
6.6.4
Removing the lamp
Necessary tools
Slotted screwdriver 4 mm or 6 mm
How to remove the lamp?
Make sure the projector has
fi
nished its cooling down cycle and wait for 15 more minutes before starting this procedure.
1. Remove the rear cover (see concerning chapter)
2. Remove the fan outlet (muf
fl
er) (see concerning chapter)
3. Release the two no-drop screws of the lamp
Image 6-8
Lamp:
fi
xing screws
4. Pull the lamp to the left side of the projector (= away from the connector) until the lamp feet are free and the lamp can be lifted
Tip:
Use the handle at the rear side of the lamp.
Image 6-9
Lamp: removing
R59770718 GALAXY NW SERIES 20/06/2013
181
Summary of Contents for Galaxy NW R9040406
