![background image](http://html1.mh-extra.com/html/barco/galaxy-nw-r9040406/galaxy-nw-r9040406_user-manual_474123126.webp)
5. Advanced
•
Full screen synchronous representation
Following illustrations give an overview on how a stereo source will be displayed in function of its vertical refresh rate and for the
different settings mentioned above.
48
60
96
120
SYNC
SYNC
ASYNC
ASYNC
ASYNC
f(Hz)
FULL SCREEN SYNCHRONOUS MODE
= on
@120Hz
@120Hz
@120Hz
@fsource
@2Xfsource
SOURCE = stereo
Image 5-135
Stereo source : Full screen synchronous representation ON
48
120
f(Hz)
FULL SCREEN SYNCHRONOUS MODE
= off
ASYNC
@120Hz
SOURCE = stereo
Image 5-136
Stereo source : Full screen synchronous representation OFF
5.9.2.2
Stereo Mode
What can be done ?
The stereo mode in the display setup menu is the mode in which the display is driven.
Following modes are available :
AUTO
the display is driven in stereo if the source is stereo (sync signal on the corresponding mini DIN connector)
ALWAYS
the display is always driven in stereo independently of the source (stereo or mono)
INFITEC
the display is always driven in In
fi
tec mode (in
fi
tec wheel system is activated) independently of the source
(stereo or mono)
Table 5-7
Stereo Mode
If
Stereo mode
is set to Always active, the source signal is upgraded to an active stereo signal. This function-
ality is called StereoCreator
TM
. This powerful feature makes it possible to have an active stereo source signal
with a vertical refresh rate of 60Hz to be fed into a monitor for preview purposes as well as into the projector
where it is upgraded to a full quality 120Hz active stereo signal.
Moreover, if more than one projector is involved, the different source signals for each of the projectors do not
need to have the same vertical refresh rate, since the projectors can upgrade each signal to 120Hz.
The frequency in which the display is driven can be a synchronous or asynchronous. This is set in the
Full
screen synchronous representation
.
How to set the stereo mode ?
1. Press
MENU
to activate the Tool bar
2. Press
→
to select the
Display setup
item
3. Press
↓
to Pull down the
Display setup
menu
120
R59770718 GALAXY NW SERIES 20/06/2013
Summary of Contents for Galaxy NW R9040406
