![background image](http://html1.mh-extra.com/html/barco/galaxy-nw-r9040406/galaxy-nw-r9040406_user-manual_474123122.webp)
5. Advanced
Image 5-126
5. Press
ENTER
to activate the Freeze function
The image can also be frozen using the FREEZE key on the RCU
5.8.4
Standby Timer
What can be done ?
If there is no (sync) signal at any of the input connectors, and the standby timer is enabled, the projector will shut down after a pre
determined time.
The countdown time can be set in a dialog box in a range from 180 to 3600 seconds (default value = 300). The Timer can also be
disabled.
How to enable the timer ?
1. Press
MENU
to activate the Tool bar
2. Press
→
to select
General
3. Press
↓
to Pull down the General menu
4. Use
↑
or
↓
to select
Standby Timer
Image 5-127
5. Press
ENTER
A dialog box is displayed
Image 5-128
6. Use
↑
or
↓
to select the radio button
Enabled,
a box surrounds the selected item, press
ENTER
to activate
7. Use
↑
or
↓
to browse to the input
fi
eld
8. Use
←
or
→
, the numeric keys on the remote or the keypad to change the countdown time
9. Press
MENU
or
BACK
to exit or to go back to the previous menu
116
R59770718 GALAXY NW SERIES 20/06/2013
Summary of Contents for Galaxy NW R9040406
