![background image](http://html1.mh-extra.com/html/barco/galaxy-nh-12/galaxy-nh-12_service-manual_3838748094.webp)
7. Electronic parts and servicing procedures
Image 7-112
LCD module:
fi
xing screws
2. Connect the LCD module to the desktop input board:
-
J300: data to the LCD module
-
J301: backlight to the LCD module
3. Install the desktop input unit (see chapter
Desktop input board
)
7.10 LVDS interface
Overview
•
Description of the LVDS interface
•
•
7.10.1 Description of the LVDS interface
Description
The LVDS interface is used to convert the desktop input signal into LVDS signals before it is sent to the PMP.
It is
fi
xed to the PMP.
7.10.2 Removing the LVDS interface
Necessary tools
Torx screwdriver T10
How to remove the LVDS interface?
1. Remove the covers (see concerning chapters):
-
rear cover
-
top cover
-
engine fan cover 1
2. Remove the four screws
fi
xing the preformatter unit to the input module
90
R59770141 GALAXY NH-12 20/02/2008
Summary of Contents for Galaxy NH-12
