![background image](http://html1.mh-extra.com/html/barco/galaxy-nh-12/galaxy-nh-12_option-installation-manual_3834140025.webp)
A. Backup and restore data
C
AUTION
:
It is not allowed to do any manual change to a backup
fi
le. A changed
fi
le cannot be restored!
A.3 Restoring a set of key data
C
AUTION
:
If a backup
fi
le has been manually changed, it will no longer be possible to restore it in the pro-
jector!
Different levels of restore
Different situations lead to different levels of restore:
•
restore data to a
used PMP
which already holds data and settings
•
restore data to a
new PMP
which has no data and settings yet
When restoring to a new PMP, the Projector Support tool automatically manages the full restore. This means that the operator can
not interact. The serial number and history are restored as well.
When restoring to a used PMP, a selection of the
fi
les to be restored can be made. The Projector Support tool however manages
the
fi
les which are critical:
•
serial number, runtimes, etc. will not be overwritten
•
option keys will not be blanked or overwritten
•
some
fi
les will be merged: newly added data (e.g. custom geometry
fi
les) will not be lost
•
some settings (e.g. automatic shutdown, warning messages ON/OFF) will not be overwritten
•
etc.
How to restore the key data in a used PMP?
It is assumed that communication with the projector has been established through
Projector Support
and that an original backup
fi
le
is available (zip format).
1. In the
Restore
section of the Projector Support tool user interface, hit
Browse
Image A-14
Projector Support tool: browse to the folder with the backup
fi
le
2. Browse to the folder on the computer where the backup
fi
le is stored
3. Select the backup
fi
le and hit
Open
R59770498 PMP KIT 28/02/2011
21