3. Engine replacement
Image 3-64
Cold mirror
Necessary tools
•
Philips screwdriver Ph2
•
Nut spanner 5.5 mm
•
Light meter
How to align the folding mirror?
1. Remove the rear cover (see concerning chapter):
2. Project a full white pattern in normal mode
3. Place the light measurement device in the center of the image, near the screen
4. Release the counter nuts
Image 3-65
Cold mirror: counter nuts released
5. Adjust screw 1 until the highest light output is measured
1
2
3
Image 3-66
Cold mirror: adjusting nuts
32
R59770591 ENGINE KIT 26/08/2010
