Barco Galaxy 12 High Brightness+ R9040370, Owner'S Manual

Page: 165 / 173

9. Service Mode
This will execute the Linked Dynacolor 1 & 2 command, all projectors in the linked setup will be set to their Common Color Gamut.
This is done by means of the following steps:
a) First, the left eye color coordinates (color coordinates 1), of all linked projectors, are set to their Common Color Gamut.
b) In the next step, the same is done for the right eye color coordinates (color coordinates 2).
c) In the final step, the Common Color Gamut for color coordinates 1 and 2 is calculated, all projectors in the linked setup are
set to this final Common Color Gamut.
3. Press
EXIT
to return to
Service
menu.
DYNACOLOR
STANDARD
COLOR COORDINATES
EXEC. LINKED DYNACOLOR
STEREO
COLOR COORDINATES 1
COLOR COORDINATES 2
EXEC. LINKED DYNACOLOR 1&2
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 9-49
R5976780 GALAXY SXGA+ SERIES 14/10/2005 161