Barco G60 W Series, User Manual

Page: 12 / 34

R5910890 /01 G60 W series 12
Image 2-4
2.3 Set up projectors and network
Network connection
Use a router to create a wired or wireless network connecting the computer and projectors. Install the Warping
and Blending Tool on this computer.
N
Image 2-5
N Network connection
Connect the projectors of the same model.
The projectors should be set with the same resolution and light source.
For wired connection, use Cat 5 or higher category Ethernet cable.
Source connection
Use a computer installed with a graphic card that supports image overlap in the same way as the input source.
Connect the computer to projectors with video cables.
Getting started