![background image](http://html1.mh-extra.com/html/barco/g60-series/g60-series_user-manual_4148306043.webp)
R5910888 /00
G60
43
5.2 Projector Problems
No image appears on-screen
•
Check if all the cables and the AC power are correctly connected. For more details, refer to the installation
manual.
•
Check if the pins of the connectors are not crooked or broken.
•
Check if the
“
Shutter (AV Mute)
”
function is disabled.
Partial, scrolling or incorrectly displayed image
•
Press
“
Auto
”
on the remote control to detect input signal automatically.
•
If you are using a PC, set the PC
’
s resolution lower or equal to WUXGA (1920 × 1200).
•
If you are using a Notebook:
-
Set the resolution lower or equal to WUXGA (1920 × 1200).
-
Press the appropriate keys listed below for your notebook manufacturer to send signal out from
notebook to projector. Example: [Fn]+[F4]
Acer
[Fn]+[F5]
Asus
[Fn]+[F8]
Dell
[Fn]+[F8]
Gateway
[Fn]+[F4]
BM/Lenovo
[Fn]+[F7]
HP/Compaq
[Fn]+[F4]
NEC
[Fn]+[F3]
Toshiba
Fn]+[F5]
Mac Apple
System Preference > Display > Arrangement > Mirror display
•
If you experience difficulty changing resolutions or your monitor freezes, restart all equipments including
the projector.
Image is flickering and shimmering
•
Adjust the pixel phase and pixel track of the projector. See
“
Pixel Phase
“
and
“
Pixel Track
“
in chapter
, page 30.
Image is fuzzy and blurry
•
Press the
“
Focus
▲”
or
“
Focus
▼”
button on the remote control or control panel to adjust the image focus
until it is sharp and clear. To adjust focus from OSD menu, select
“
Options > Lens function > Focus
“
.
•
Make sure the projection screen is in proper distance with the projector. For projection distances of each
lens, see chapter installation manual.
Stretched when displaying 16:10 DVD videos
•
Set appropriate aspect ratio for the projector by selecting
“
Screen > Aspect Ratio
“
from the OSD menu.
•
Set the aspect ratio to 16:10 on the DVD player.
Image is too small or too large
•
Adjust the image size by pressing the
“
Zoom
▲”
or
“
Zoom
▼”
button on the remote control or control panel,
or selecting
“
Options > Lens function > Zoom
“
from the OSD menu.
•
Adjust the distance between the projector and the screen.
•
Adjust the aspect ratio by selecting
“
Screen > Aspect Ratio
“
from the OSD menu.