![background image](http://html1.mh-extra.com/html/barco/g60-series/g60-series_user-manual_4148306038.webp)
R5910888 /00
G60
38
4.7 3D Menu
Overview
Image 4-15
3D
Enable the 3D function.
•
Auto
: The projector automatically enables 3D function when receiving the 3D input in 1.4a format.
•
On
: Turn on the 3D function manually.
3D Invert
3D video files and images combine two slightly different images (frames) of the same scene representing the
different views that the left and right eyes see. When these frames are displayed fast enough and viewed with
3D glasses synchronized with the left and right frames, the viewer
’
s brain then assemble the separate images
into a single 3D image. When the 3D image does not appear correctly, invert the sequence of the left and right
frames.
3D Format
Select a proper 3D format for the 3D input signal. The available options are Frame Packing, Side-by-Side
(Half), Top and Bottom, and Frame Sequential.
3D Sync Out
Set up the transmission of the 3D sync output signal.
•
To Emitter
: Send the 3D sync output signal to the emitter connected to the projector
’
s 3D sync out port.
•
To Next Projector
: For multiple projector applications, send the 3D sync output signal to next projector.
Frame Delay
Set a frame delay value for the projector to correct the time difference between the 3D signal being given and
the result being executed. This function works only when L/R Reference is set to Field GPIO.
When performing 3D blending on multiple projectors, set the frame delay for each projector to correct the none
synchronous images.