Barco G100 Installation Manual Download Page 59

Page: 59 / 68

R5913458 /01

G100

5.2 Powering off the projector

How to power the projector off

Press the POWER button (2) on the control panel or the OFF key (5) on the remote control.

A message will prompted on screen to confirm if you want to turn off the projector.

Press the POWER button or OFF key again to confirm. If not, the message will disappear after 10 seconds
and the projector will remain on.

The projector will go to standby mode.

Once the projector has entered standby mode and you want to turn the projector off completely, power off
the AC switch.

Tip:

If you still plan to use the projector in the foreseeable future, it is recommended to keep the

projector in standby mode. Only turn off the projector completely if you want to physically move
the projector, or if you do not plan on using the projector for the foreseeable future.

CAUTION:

It is not recommended to turn the projector on immediately after powering off the

projector.

Powering on/off the projector

Summary of Contents for G100





































































Search results

Summary of Contents for G100

Reviews:

Related manuals for G100

Brands by name

Popular brands

Barco G100, Installation Manual

Search results

Summary of Contents for G100

Reviews:

Related manuals for G100

Brands by name

Popular brands