Barco FSN Series, User Manual

Page: 50 / 344

50 FSN Series • User’s Guide
2. FSN-1400 Orientation
Card Descriptions
3) Loaded LED
The Loaded LED indicates the status of all FPGAs on the card. Refer to the
“ Card LEDs ” section on page 55 for details.
4) Universal Input 1
Three connectors are provided for Universal Input 1 (1 x HD15 , 1 x DVI-I , 1 x
BNC ). Using these connectors, different combinations of inputs can be connected
to the FSN-1400, as outlined below, but only one of the three connectors can be
used at a time on the control panel.
Cells with check marks denote the connections required for the indicated format.
* up to 165 MHz
** NTSC, PAL or HD
*** up to 165 MHz (UXGA)
Please note the following important points regarding the UIC :
~
Refer to the “ Analog Format Connection Table ” section on page 56 for
additional information on using the HD-15 connector.
5) Universal Input 2
Input connections for Universal Input 2 are identical to Universal Input 1. Refer
to the explanation of Universal Input 1 for details.
Table 2-5. UIC connector combinations for selected universal input formats
Connectors
Format BNC DVI-I HD-15
HD-SDI
SD-SDI
DVI *
CVBS
Y/C
YPbPr **
RGsB
RGBS
RGBHV ***
Note In Appendix A, refer to the “ Delay Specifications ” section on
page 313 for details on UIC delay.