FSN Series • User’s Guide
177
5. Menu Orientation
System Menu
•
To change the
IP address
of a highlighted port, press
{Set IP Address}
to display
the
IP Address Keypad
:
Figure 5-72.
IP Address keypad (sample)
Enter the desired IP address using the decimal point as the separator between the
four “octets,” and press
{Enter}
.
•
To change the
Subnet Mask
of a highlighted port, press
{Set Subnet Mask}
to
display the
Subnet Mask Keypad
. Enter the desired subnet mask using the
decimal point as the separator between the four “octets,” and press
{Enter}
.
•
After setting both the
IP address
and the
Subnet Mask
, press
{Apply}
to
complete the procedure.
•
To return the highlighted port’s IP address and Subnet Mask to their factory
default values, press
{Restore Default Settings}
.
Set IP
Address
192.168.0.4
Set IP Address
Close
7
8
9
4
5
6
Trim -
1
0
2
3
.
+ / -
Enter
Undo
Clear
Trim +
Note
You do not have to enter all three digits in a particular octet.
For example, you can enter
4
instead of
004
.
Set
Subnet
Mask
Apply
Restore
Default
Settings
